The fully coated pump line has the highest lined pumps and higher pressure rating available that prioritize increased safety, service life and reliability.
The fully coated pump is quickly establishing itself as the dominant pump in the Canadian oil sands, providing an efficient and durable solution for hydraulic transport services long distance and work with waste.
fully revestida
pump FEATURESSize range (discharge)
20 "to 24"
500 mm to 600 mm
Capacidades
40,000 gpm
to 9100 m3 / h
Desníveis
up to 220 feet
-67 m
Pressões
up to 580 psi
up to 4,000 kPa
fully revestida
pump BENEFITSInstallation of bearings
A large diameter shaft with reduced rotor balance results in minimal deflection in the sealing and less load on mancais.
heavy roller bearings increase the mean time between reconstruções.
Only six through bolts and two clamping plates are sufficient to secure the cartridge housing in the base part única.
Plates cover / estrutura
Plates coverage and high strength ductile iron structure supporting the resistance of the coating components abrasão.
Working pressure of 4000 kPa leading industry (580 psi) .
Extensive reinforcing ribs minimize the linear deflection and improve wear characteristics and performance.
Double wall construction permits the use of replaceable wear coatings to completo.
bolted discharge piping directly minimizes the risk of flange failures common on hard iron pumps not revestidas.
Coverage Suction
separate suction and fully removable cover facilitates access and replacement of the bushing throat and rotor shaft sleeve without disturbing the pipe cover plate or descarga.
Revestimentos
The coatings are field replaceable and are fastened to cover plates and structure for positive attachment and ease of manutenção.
Available in various metals and elastomers to erosion and corrosion resistant to maximize the life of the individual parts and extend the maintenance cycles preventiva.
The hydraulic coating design has an optimized geometry that offers long life to a variety of fluxos.
Rotor
A hydraulic designed specifically emphasizes ability to pass, difference of generation, life and solid efficiency to provide a general performance excepcional.
aggressive expelling vanes on the front cover minimize recirculation and improve the life of the bushing garganta.
Optional expelling vanes on the rear cover reduce pressure on the seal housing and axial loads to improve the life of mancais.
piece base única
A massive base piece supports the mounting of the cartridge bearings and transmits forces for fundação.
The base includes an external adjustment mechanism to maintain the clearance between the rotor and the throat bushing for optimum pump performance.
Design, manufacture and worldwide supply of end suction horizontal and vertical centrifugal pumps for the water, effluents, chemical, petrochemical, paper and pulp and general process industries. UK based. Vertical search engine that searches the pulp, paper, and related industries websites. Manufacturer of corrosion resistant pumps and filtration systems for pumping, transferring and filtering a wide range of industrial corrosive liquids. Product range includes drum, vertical centrifugal, magnetic drive horizontal and sump pumps. US (NY) based division of Met-Pro Corporation.
